FAQs and Downloads
The following fitting and warranty guidelines for Luvanto can be viewed here:
However we recommend you enlist the services of a qualified Luvanto LVT installer.
Luvanto Fitting Guidelines (Latest Version)
For Luvanto Design, & Design Herringbone, Click, Click Herringbone & Click Plus, and Pace ranges we offer a 25 Year Domestic Warranty and 10 Year Commercial Warranty.
For Luvanto Endure Pro we offer a Lifetime Domestic Warranty and a 20 Year Commercial Warranty.
WHERE CAN I FIND THE WARRANTY TERMS AND CONDITIONS
A Lifetime Warranty is for 30 years or until such time that the property changes ownership.
- Easy maintenance
- Dimensionally stable
- Quicker to lay and a lot more cost effective
- Scratch resistant
- Water resistant
- 100% water resistant so doesn’t split or bubble from water damage.
- Very stable in fluctuating temperatures so only requires a 5mm expansion gap instead of 10mm
- Good wear resistance with 0.55mm wear layer compared to laminated veneer.
- Deep embossed Matt finish and bevel edge making it look like a truly natural product.
- Easy to cut with a knife so no sawdust or cutting machinery.
- Warm to the touch due to it being a PU surface.
- Built in underlay for comfort.
- Absorbs impact and doesn’t chip as easily as laminate flooring.
Yes, Luvanto Design and Luvanto Endure Pro can be used in areas of direct sunlight such as a conservatory, provided the correct installation procedures and adhesives are utilised. Luvanto Click cannot be used in areas of direct sunlight.
Note: Like any product placed in areas of direct sunlight, the floor colouring may fade over time due to UV damage.
Liquid spills will not damage your Luvanto floor, however, if you were to leave a pool of liquid for an extended period of time, this could cause damage to the subfloor.
Yes, all Luvanto floors are 100% water resistant. Mopping would cause no damage to your floor.
We recommend using the approved Luvanto Floor Care Kit to clean and maintain your Luvanto floor. These can be purchased from Luvanto stockists. However if this is not available, a mild detergent may be used to clean your Luvanto floor.
Luvanto is exceptionally easy to clean using the approved Luvanto Floor Care Kit. If this is not available, simply wipe with warm water and a mild detergent until you are able to clean the floor with the approved cleaning kit.
Luvanto is 100% Water Resistant and perfectly fine to be installed in both the Bathroom or the Kitchen. Due to the ease of cleaning and inherent resistant properties of Luvanto, it is very well suited to both the Kitchen and Bathroom environments.
As with all LVT products where the joints are not sealed, any spillages should be mopped up as soon as possible to avoid seepage through to the subfloor.
Neither Luvanto Endure Pro, Luvanto Click or Click Plus require gluing or nailing down.
Yes! In fact, we recommend you install Luvanto on all your floors.
Yes – refer to the fitting instructions for correct subfloor preparation before installing the Luvanto flooring
Absolutely! You can make your floor design as unique as your imagination will let you.
Adhesive is required for the Luvanto Design & Design Herringbone Ranges.
QA Universal Adhesive has a maximum coverage rate of 200g per square metre or 5sqm per 1kg using a V notched trowel (A1, A2, B1). Coverage will vary depending on substrate and back of the floorcovering.
QA High Temperature has a maximum coverage rate of 250g per square metre or 4sqm per 1kg using a V notched trowel (A1, A2, B1). Coverage will vary depending on substrate and back of the floorcovering.
Always refer to the Installation Guidelines on the label.
Click HERE for more information on our adhesive range.
To create a grout effect to your flooring, see the following examples:
Tiles 305mm x 305mm – One pack of Luvanto Design Strips = 3.74 packs of tiles.
For example: 5 packs of tiles = 5 ÷ 3.74 = 1.33. You would need 2 packs of Design Strips.
Tiles 305mm x 610mm – One pack of Luvanto Design Strips = 2.77 packs of tiles.
For example: 5 packs of tiles = 5 ÷ 2.77 = 1.8. You would need 2 packs of Design Strips.
Planks 152mm x 914mm – One pack of Luvanto Design Strips = 2.08 packs of wood planks.
For example: 5 packs of tiles = 5 ÷ 2.08 = 2.4. You would need 3 packs of Design Strips.
The recommended retail price (RRP per m2 excluding VAT) for Luvanto is as follows.
This excludes, for example, any delivery charges, subfloor preparation, fitting or accessories required to install the floor.
You should always confirm the complete cost of installation with your flooring supplier or fitter.
For expert advice visit your nearest Luvanto Showroom.
Luvanto Design Wood Planks & Stone Tiles RRP £26.99 per m2 + VAT
Luvanto Design Sparkle Tiles RRP £28.99 per m2 + VAT
Luvanto Design Traditional Herringbone and Contemporary Herringbone RRP £40.99 per m2 + VAT
Luvanto Design Large Plank Herringbone RRP £26.99 per m2 + VAT
Luvanto Click Wood Planks and Stone Tiles RRP £31.49 per m2 + VAT
Luvanto Click Sparkle Tiles RRP £33.49 per m2 + VAT
Luvanto Click Herringbone RRP £42.49 per m2 + VAT
Luvanto Click Plus Wood Planks and Stone Tiles RRP £31.49 per m2 + VAT
Luvanto Pace Wood Planks and Stone Tiles RRP £43.49 per m2 + VAT
Luvanto Endure Pro Wood Planks and Stone Tiles RRP £43.49 per m2 + VAT